3 Ways to Conserve Water in the Bathroom

Content originally published and Shared from http://perfectbath.com

When you conserve water at home you’re not just saving the environment, but you’re also saving some money. Try these tips and see how much you can lower your bill each month.

Image Source: Flickr

Install a low-flow showerhead
It may cost you some money up front, but your water conservation efforts will save you money down the road. Conventional showerheads flow at 5 gallons per minute or more, whereas low-flow showerheads typically flow at 2.5 gallons per minute (or less!). Source: Gracelinks

Put plastic bottles or float booster in your toilet tank
To cut down on water waste, put an inch or two of sand or pebbles inside each of two plastic bottles to weigh them down. Fill the bottles with water, screw the lids on, and put them in your toilet tank, safely away from the operating mechanisms. Or, buy an inexpensive tank bank or float booster. This may save ten or more gallons of water per day.

Be sure at least 3 gallons of water remain in the tank so it will flush properly. If there is not enough water to get a proper flush, users will hold the lever down too long or do multiple flushes to get rid of waste. Two flushings at 1.4 gallons is worse than a single 2.0 gallon flush. A better suggestion would be to buy an adjustable toilet flapper that allow for adjustment of their per flush use.  Then the user can adjust the flush rate to the minimum per flush setting that achieves a single good flush each time. Source: EarthEasy

Get or create a dual-flush toilet
This is basically a toilet that flushes a smaller amount of water for when you pee and more water for pooping, thereby saving water. Use the half flush button with a dual-flush toilet. Source: WikiHow

We offer top-of-the-line bathroom fixtures that you can use to replace the leaky ones in your home. Contact us!

 

Contact:
Perfect Bath
Phone: Toll Free 1-866-843-1641
Calgary, Alberta
Email: info@perfectbath.com

The post 3 Ways to Conserve Water in the Bathroom appeared first on Perfect Bath Canada.

from Perfect Bath Canada http://ift.tt/2uIoHV1

Chilaquiles with Cashew-Coriander Crema {Vegan}

I just got back from Italy and it was THE BEST. Even though we almost melted in the 40+ degree heat (global warming is very scary) and got attacked by mosquitos I was still one of my favourite places I’ve ever visited. I’m very excited to go back sometime and see more of it…so so much more! I only got to see Florence this time so there are many more places to visit and a LOT more food to be eaten.

I think my favourite aspect of visiting Italy, apart from the amazing food, was the fact that I just weirdly slotted in. I’ve always felt slightly out of place in the UK – I’m short, have slightly olive-y skin and thick wavy hair thanks to my half-Italian genetics. In Italy though I obviously just looked like one of the gang which is kind of comforting when you’re travelling in a new country.

ANYWAY that has absolutely nothing to do with this recipe at all because this is a post about chilaquiles from the gorgeous book, One Part Plant, by Jessica Murnane! All the recipes in her book are super accessible and also plant-based which is right up my street. This recipe is so easy to assemble and a lil bit sneakily healthier than a standard recipe for chilaquiles – instead of using regular fried tortilla chips, we just bake up some tortillas until they’re crispy and use those! They have a bath in a warm, spiced tomato/black bean sauce just before serving so you get some chips which are crispy and some which have sogged up a bit – a perfect balance of textures. The cashew crema is genius and quick to make; although the recipe advises to soak overnight, I’ve found soaking cashews in boiling water for 30 mins is usually enough time if you’ve got a high-powered blender.

So get your brunch on and make yourself some taaasty chilaquiles!

Chilaquiles with Cashew-Coriander Crema {Vegan}

FOR THE CILANTRO CREAM:

• 40 g (½ cup) raw cashews, soaked in water for at least a few hours (overnight is best), drained
• a large handful ((¼ cup) coriander (cilantro))
• 2 tablespoons fresh lime juice (, or to taste)
• 125 ml (½ cup) water, plus more if needed
• Pinch of sea salt

FOR THE REST:

• 190 ml (¾ cup) vegetable stock, plus more, if desired, for sautéing
• Olive or coconut oil for sautéing (, if desired)
• ½ medium onion (, diced (about 1 cup))
• Dash of sea salt
• two 400g ((or one 28-ounce) can crushed tomatoes)
• 2 garlic cloves (, chopped)
• 1 chipotle pepper in adobo sauce ((see notes))
• ½ jalapeño (, seeded and chopped)
• 230 g (1 cup) cooked pinto beans or black beans, drained and rinsed if canned
• 12 (8-inch) corn tortillas, cut into 8 pieces (see notes)

TOPPING IDEAS:

• Avocado
• Cilantro and onions
• Diced peppers or tomatoes
• Hot sauce

1. Preheat the oven to 180C (350F).
2. To make the cilantro cream: place all the ingredients in a high-speed blender and blend until the mixture is completely smooth. This might take up to 5 minutes, depending on the power of your blender. Add more water as you go if needed. Taste and add more salt or lime juice if desired. Pour the cream into a small bowl and rinse your blender—you’ll be using it again soon.
3. To finish the dish, heat a few tablespoons of veggie broth or a glug of oil in a large skillet over medium. When the pan is hot, add the onion and salt and sauté until the pieces are soft and translucent, about 5 minutes.
4. Combine the tomatoes, vegetable stock, garlic, chipotle, and jalapeño in a blender and blend until the mixture is smooth. Pour it into the pan with the onion and bring it to a boil. Reduce the heat and simmer for 10 minutes.
5. While the sauce is simmering, spread the tortilla pieces on a baking sheet and bake for 5 to 15 minutes, until they begin to dry out and start to curl on the sides. If you aren’t able to spread all the chips on your sheet, do them in two batches or use two sheets. You can also spray the tortillas with a little olive oil for extra crispness.
6. Stir the beans into the sauce and simmer on low for a few more minutes. When you are ready to serve, stir the chips into the sauce—but only when you are ready to serve! You don’t want them to get too soggy—you’re aiming for a combination of soft and crunchy. Serve the chilaquiles warm, topped with coriander cream and your chosen toppings

– Recipe from One Part Plant by Jessica Murnane*
– I find it super hard to get chipotles in adobo in the UK so I used a teaspoon of smoked chipotle paste (Gran Luchito is an excellent brand)
– It’s also hard to find totally corn-based tortillas in the UK! So I used seedy wholemeal (wheat) wraps instead

*affiliate link

The post Chilaquiles with Cashew-Coriander Crema {Vegan} appeared first on Izy Hossack - Top With Cinnamon.

from Izy Hossack – Top With Cinnamon http://ift.tt/2uEjVIc

Jasmine at The Gardens – NOW SELLING!

At a Glance

• last phase of South Richmond’s only master-planned community
• 23 luxury concrete townhomes
• 2- or 3-story, 2- & 3-bedroom homes
• self-contained urban village with stunning 12-acre park
• most homes have panoramic views
• access to 6,000 sq ft amenity complex
• steps from Loblaws City Market, Ironwood Plaza, Coppersmith Mall
• easy access to Highway 99, YVR Airport, BC Ferries, US border

Luxury Living on the Park

Jasmine is a refined collection of twenty three luxurious air-conditioned parkside townhomes neighbouring a serene twelve-acre natural park. As the final phase of The Gardens, a master-planned urban village in a sought-after South Richmond neighbourhood, these two- and three-bedroom homes span across two- or three-storeys, offering spacious interiors for comfortable modern living. Expansive rooftop terraces in some homes provide a seamless integration between indoor and outdoor spaces, perfect for both relaxing and entertaining. The effortless elegance of these modern townhomes perfectly complements the surrounding natural beauty of the adjacent park.

Be A Presale Condo VIP!

Find Out About New Presales & Get Access to VIP Openings & Special Promotions!

Are you a realtor? Click here

• First/Last Name *
• E-mail *
• Phone
• *
  Select A Region * Vancouver Downtown Vancouver East Side Vancouver West Side Vancouver South North Shore Burnaby/New West Coquitlam/Tri Cities Richmond Langley/Surrey
• I Am Interested In *
  New Vancouver Presale Condos Buying a Condo Selling my Condo
• Realtor Status *
  I already have a Realtor I don't have a Realtor yet
• Comment/Notes
• Page Label
• Type
• Receipent
• Security Code *
  

  
• Should be Empty:

Jasmine at The Gardens’ convenient and highly accessible location is only one factor that contributes to the elevated lifestyle you’ll experience living here. The rest comes down to design. Every element, whether it’s flooring finishes, window sizes and orientations, shower niches or kitchen layouts, everything has been thoughtfully planned and meticulously designed, ensuring comfortable living. With stunning exteriors and exquisite interiors, coming home has never been more inviting.

Pricing for Jasmine at The Gardens
Contact me today to discuss availability, plans, and prices for this limited, exclusive opportunity.

Floor Plans for Jasmine at The Gardens
Jasmine offers 23 townhouses with one 2-bedroom and five 3-bedroom plans to choose from.

Jasmine at The Gardens Interiors

A choice of three well-curated West Coast colour palettes defines sophisticated interiors. Step inside a Jasmine townhome filled with natural light – the result of high ceilings and expansive windows. The intelligently designed open concept conveys an uninterrupted flow of space, enhancing brightness from wall to wall. Appreciate your surroundings when relaxing after a long day or in the company of friends and family.

• Three thoughtfully curated west coast colour palettes to choose from
• Over-height ceilings starting at 9′ in main living areas for all homes
• Luxurious wide-plank laminate flooring throughout
• Solid, wood shelves and chrome rods in all closets
• State-of-the-art roller blinds on all exterior windows
• Efficient forced-air heating and cooling system for year-round comfort
• High-efficiency Blomberg washer and dryer

Kitchens not only look beautiful; they are exquisitely designed to function the way you want them to. Ample storage keeps all your culinary supplies and groceries organized, while plenty of counter space gives you room to work. The full-sized appliances will ensure you’re fully-equipped and able to experiment in the kitchen with ease.

• Premier professional grade appliance package:
  • Blomberg 30″ 17.8 cu. ft. Energy Star stainless steel refrigerator
  • Bosch 30″ stainless steel five-burner gas cooktop
  • Bosch 30″ 4.6 cu. ft. stainless steel wall oven
  • Venmar 30″ 450 CFM stainless steel hood fan with 3 speed settings
  • Bosch 24″ Energy Star™ integrated stainless steel dishwasher with fourteen place-setting capacity
  • Panasonic 24″ 1.2 cu. ft. stainless steel microwave with trim kit
• Durable and easy-to-clean quartz countertops and backsplash
• Modern, under-mounted double bowl sink with a polished chrome faucet
• Soft-close laminate cabinetry with brushed nickel hardware
• Under-cabinet lighting

Retreat to the luxurious spa-like en suite after a long day at work where you’ll be welcomed with heated floors, a soaker tub and sleek tile surround. Indulge in the panoramic mountain and park views from your private rooftop terrace, a perfect place to gather with friends and family for a meal under the evening sky.

• Solid quartz counter tops
• Under-mounted sinks with European styled chrome faucets
• Soft-close cabinetry with brushed nickel hardware
• Powder room on main living floor

PRIMARY BATHROOMS

• Custom designed mirrored medicine cabinet
• Comfortable, custom heated floor tiles
• Full-height, large format porcelain tiles on all walls and floors
• Elegant frameless glass shower enclosures
• Recessed wall niche with shelf
• Bathrooms with tubs feature a contemporary 5′ soaker tub with tiled apron

SECONDARY BATHROOMS

• Frameless mirror with warm hued overhead lighting
• Large format porcelain tiled floors
• Contemporary 5′ soaker tub
• Feature wall with elongated hexagon tiles

Amenities at Jasmine at The Gardens
As part of a master-planned community, Dahlia residents will enjoy a range of amenities not normally found included in condominium developments. A 6,000-square-foot amenity complex offers an indoor gymnasium with basketball and badminton courts, changing rooms, a state-of-the-art fitness centre, a conference room, and a shared green space.

A 10,900-square-foot courtyard will provide a lawn with water feature, children’s play area, a covered outdoor dining area, and a summer flower garden. A 12.2-acre Agricultural Park will include trails, play areas, ponds, community gardens, and horticultural and agricultural interpretive facilities in the various garden areas.

In addition to the commercial spaces that have already been constructed in Phase 1 of The Gardens, a 37-space child care facility will be housed in an existing replica Dutch castle that was originally donated to Vancouver for Expo ’86 by the city of Coevorden, the ancestral home of Captain George Vancouver.

Parking and Storage
Each home includes a private two-car garage with ample space for storage.

Maintenance Fees at Jasmine at The Gardens
Included in pricing information.

Developer Team for Jasmine at The Gardens
Townline Group of Companies is a real estate development company focused primarily in the Lower Mainland and Vancouver Island in British Columbia, Canada. Since 1981, they have amassed a diverse project portfolio spanning market and non-market multi-family housing, rental apartments, single-family homes, heritage restoration, mixed, commercial, and retail developments. Through the firm’s various departments, they stay hands-on for the entire life of a project to ensure they create the kind of residential and commercial places people want as their own, such as 999 Seymour and 1335 Howe.

Townline has chosen ZGF Cotter Architects to design this final phase of The Gardens. ZGF’s design philosophy is centred on the premise that design excellence should be reflected in each and every aspect of a building—its fit with the community, its function and relationship to its users, its building systems, and its cost. The firm’s design portfolio is intentionally diverse, ranging from transportation terminals, commercial office and mixed-use developments to corporate campuses, healthcare and research buildings, academic facilities, libraries, and museums. In addition to receiving more than 770 local, regional, and national design awards, ZGF was honoured with the American Institute of Architects’ highest honour, the Architecture Firm Award, recognized for “creatively transforming client needs and aspirations into elegant, inventive architectural form, and establishing a standard of excellence and expectation of quality to which other firms aspire.”

Expected Completion for Jasmine at The Gardens
Selling now.

Are you interested in learning more about other homes in Richmond, the Cambie Corridor, or South Vancouver?

Check out these great Richmond Presales!

The post Jasmine at The Gardens – NOW SELLING! appeared first on Mike Stewart.

from Blog – Mike Stewart http://ift.tt/2vBUCLa

Landmark on Robson – Availability, Prices, Plans

At a Glance

• exceptional Robson Street location
• 31- & 32-storey towers on 4-storey mixed-use podium
• 237 condominium homes
• unparalleled 270-degree views
• floor-to-ceiling windows
• steps to 200+ of world’s top retailers
• endless multicultural dining options
• close to Stanley Park & Coal Harbour

A Landmark Location
The new international benchmark of luxury living. Located on the world-renowned Robson Street, this sophisticated development boasts unparalleled 270-degree views of English Bay, Coal Harbour, Stanley Park, and the North Shore mountains. Envisioned by an award-winning international developer, architect and design team, this stunning landmark will be the new global influence of Vancouver.

Be A Presale Condo VIP!

Find Out About New Presales & Get Access to VIP Openings & Special Promotions!

Are you a realtor? Click here

• First/Last Name *
• E-mail *
• Phone
• *
  Select A Region * Vancouver Downtown Vancouver East Side Vancouver West Side Vancouver South North Shore Burnaby/New West Coquitlam/Tri Cities Richmond Langley/Surrey
• I Am Interested In *
  New Vancouver Presale Condos Buying a Condo Selling my Condo
• Realtor Status *
  I already have a Realtor I don't have a Realtor yet
• Comment/Notes
• Page Label
• Type
• Receipent
• Security Code *
  

  
• Should be Empty:

Pricing for Landmark on Robson
This project is currently in pre-construction. Prices have yet to be announced. With an incredible range of amenities and activities within walking distance, you can be sure this will be one of Vancouver’s most sought after properties. Interested buyers are strongly recommended to sign up to our VIP list above for immediate notification of any new developments.

Floor Plans for Landmark on Robson
Residences range in size from 500-2,500 sq ft with the following mix of units:

• 54 x 1-bedroom
• 141 x 2-bedroom
• 40 x 3-bedroom
• 2 x 5-bedroom

To determine availability and arrange to view suitable plans, contact me today to evaluate your purchase options.

Amenities at Landmark on Robson
The Landmark on Robson will feature 18,000 sq ft of amenities, including a private dining room, fitness centre, Ozone swimming pool, and a large communal terrace garden on the 7th floor. Club Robson will offer 24-hour, on-demand concierge-style lifestyle services with access from your phone. You can request everything from personal shopping to a chauffeur-driven car.

Parking and Storage
Landmark on Robson will provide 276 vehicle parking spaces in three levels of underground, including 31 visitor spaces and 16 handicapped spaces. There will also be space for 351 Class A bicycle stalls and 11 Class A visitor bicycle stalls. The two towers will be served by one Class A and 5 Class B loading bays.

Maintenance Fees at Landmark on Robson
To be determined.

Developer Team for Landmark on Robson
Asia Standard Americas is a Vancouver-based development company with a strong commitment to architectural excellence, design integrity, and livability. They work closely with the cities and neighbourhoods in which they develop to enhance the master vision for the area, thus providing value not only for the end-user, but also the community. ASA has owned and operated the Empire Landmark Hotel for twenty years. As such, they share a strong affinity for Vancouver’s high standard of life, urban planning, and commitment to sustainability.

PDP London was formed almost 25 years ago by a small group wishing to push the boundaries and bring some fresh thinking to the approach of their clients – to encourage them to think of the process of place making rather than simply “building”. Now they are a 120-strong London based practice with an international portfolio and an office in Hong Kong. PDP is well known for its skilful integration of new buildings within historic urban environments through a broad spectrum of residential, urban design, commercial, cultural and mixed-use projects.

Founded in 1965, Vancouver-based Musson Cattell Mackey Partnership has grown to become one of British Columbia’s most respected architectural practices with over 60 staff. The firm’s approach as a team player combines a strong design orientation with a depth of solid expertise in programming, master-planning, interior design, functional planning, construction methods, cost control, local code requirements, contract administration, sustainable building, integration of technology, and various methods of project delivery.

Atelier Ikebuchi is the Singapore-based interior design firm of Japanese architect, Koichiro Ikebuchi. His projects range from hotels to luxury residences with projects in Asia, the Middle East, and Oceania. Ikebuchi’s work has been recognized with the Diamond International Award by De Beers, Design Award by Saporiti Italia, and the President’s Design Award Singapore. In 1999 – 2000, Koichiro Ikebuchi exhibited his own furniture collection at the Salone del Mobile in Milan.

Expected Completion for Landmark on Robson
2021.

Are you interested in learning more about other homes in Yaletown, Downtown or Coal Harbour?

Check out these great Downtown Vancouver Presales!

The post Landmark on Robson – Availability, Prices, Plans appeared first on Mike Stewart.

from Blog – Mike Stewart http://ift.tt/2uDVLNT

1616 West Georgia Street – Prices, Plans, Availability

At a Glance

• located at the gateway to Downtown Vancouver
• 33- & 39-storey condominium towers
• 3-level townhouses
• 350 residences
• 75% of homes 2-bedroom+
• penthouses with private rooftop terraces
• walking distance to Stanley Park & Coal Harbour
• steps from Robson & Denman boutiques & restaurants
• goal of LEED Gold certification

Where Life Intersects
Where the West End, Coal Harbour, and Downtown meet, experience the satisfaction of Vancouverism when living at 1616 West Georgia. All of your daily needs are fulfilled with an easy stroll from your front door. Walking, jogging, cycling, roller blading, swimming, kayaking, sail boarding, rowing – just minutes away at Coal Harbour and the world-renowned Stanley Park. A wide range of multicultural boutiques, cafes, restaurants, and shops underpin a vibrant street scene along Robson and Denman. Convenience is by design.

Be A Presale Condo VIP!

Find Out About New Presales & Get Access to VIP Openings & Special Promotions!

Are you a realtor? Click here

• First/Last Name *
• E-mail *
• Phone
• *
  Select A Region * Vancouver Downtown Vancouver East Side Vancouver West Side Vancouver South North Shore Burnaby/New West Coquitlam/Tri Cities Richmond Langley/Surrey
• I Am Interested In *
  New Vancouver Presale Condos Buying a Condo Selling my Condo
• Realtor Status *
  I already have a Realtor I don't have a Realtor yet
• Comment/Notes
• Page Label
• Type
• Receipent
• Security Code *
  

  
• Should be Empty:

Pricing for 1616 West Georgia Street
This project is currently undergoing the development application process. Prices are yet to be determined. Given its prime location and high walkability, we expect 1616 Georgia to sell out quickly. To ensure an opportunity to purchase one of these luxury residences, sign up to our VIP list above for timely updates.

Floor Plans for 1616 West Georgia Street
Floor plans have not yet been finalized. A total of 350 units are being proposed, of which 274 will be 2-bedroom or larger. One- and two-bedroom residences will range in size from 502 – 1,342 sq ft. Three-storey townhomes are envisioned to front onto Alberni Street.

Amenities at 1616 West Georgia Street
Details have yet to be released.

Parking and Storage
Preliminary plans call for 389 parking stalls in four levels of underground.

Maintenance Fees at 1616 West Georgia Street
Will be included with finalized pricing information.

Developer Team for 1616 West Georgia Street
For nearly 50 years, Vancouver-based Shato Holdings has won awards for innovative design and outstanding quality. Since their founding by Peter Toigo of White Spot fame, they have built a portfolio of prime office, commercial, and residential developments, including The Spot on Cambie, and the 400-home master-planned community and golf course at Tsawwassen Springs.

IBI Group Architects is a multi-disciplinary consulting firm that was founded in Vancouver and Toronto in 1974. By integrating their four core disciplines (urban land, facilities, transportation and systems), they develop holistic strategies that shape the urban environment for a more sustainable future.

PWL is a leading Vancouver-based landscape architectural firm with forty years of experience in public and private sector planning and design across Canada, the U.S., and internationally. They work collaboratively with their clients, and with a wide range of specialists and collateral professions to create innovative, imaginative places that incorporate both social and environmental benefits.

Expected Completion for 1616 West Georgia Street
TBA.

Are you interested in learning more about other homes in Coal Harbour, Downtown or Yaletown?

Check out these great Coal Harbour Presales!

The post 1616 West Georgia Street – Prices, Plans, Availability appeared first on Mike Stewart.

from Blog – Mike Stewart http://ift.tt/2vM4qDb

How-to Go Tubeless

Tired of punctures & flat tires? Go Tubeless and don’t worry about them anymore. In this article I show how you can convert your bike to tubeless tires with the help of the Schwalbe Tubeless Easy Kit, your one stop solution with everything you need to go Tubeless.

Disclaimer: Schwalbe has provided me the Tires, Tire Booster and Tubeless Easy Kit for free for this article. This did not influence the article as I maintain full editorial control of the content published on this site. Read the Transparency Disclaimer for more information on affiliate links & blogger transparency.

Flat tires on 29” wheels, they where common for me back with my old 29er. Happily I started to drive more careful and punctures have been rare in the last several years, but as I welcomed the Trek 920 Disc to the family I decided I wanted to ride it Tubeless. There where some good reasons for that:

• You can save weight. I’m still a ultralight backpacker at heart and if there’s a possibility to save weight then I’ll take it.
• Adiós, Punctures! Don’t like that sound of your inner tube going flat? I hate it, and with a healthy dose of your Latex liquid in your tube that sound is unlikely to reach your ears again.
• Traction, baby! Less pressure on the tires means you have more traction - pretty useful in sharp curves and lose trails.

So, with three good reasons to get rid of inner tubes I set out on a sunny afternoon to convert my 920 Disc to Tubeless. It isn’t a quick operation by all means so make sure you have a couple of hours of peace to go about this. Here’s what you’ll need:

• Tubeless-Ready Rims
• Tubeless-Ready Tires, I chose the Schwalbe Thunder Burt Evo SnakeSkin PaceStar 29x2,10” TL-Easy Folding
• Schwalbe Tubeless Easy Kit
• Schwalbe Tire Booster or a compressor
• Floor pump
• A bucket with soapy water and some rags

Alright, with all your tools and gear ready it’s time to start.

1. Preparation is KEY! Your Tire Booster needs to be “primed” first, so take your floor pump and put some 11 bars of air in it - that way you don’t need to do it later. Also, a good thing to do is to unfold your tire - if you’re using a tire that comes folded like I did - before you start the whole operation - and hang it into the sun. It will warm up and get a tiny, tiny bit more flexible which makes it easier to put on the rim later.

2. Lets first check if your rim is Tubeless-Ready. If it is it should be written on it somewhere - either it reads Tubeless Ready or “TLR” somewhere. If they are: Great, that saved you several hundred Euros for new Rims!

1. Time to deflate the tube, remove tire + tube + old rim tape, and get cleaning. Take a soapy rag and clean the inside (and while you’re at it, also the outside) of the rim, remove all dirt & dust and then dry it well off. That’s because the next step is quite crucial for the success of the whole operation, and if you hurry through this you might do it twice, so calm and relaxed. Now you grab the Tubeless Rim Tape (these are available in different widths, make sure to buy the one which works best for your rim!) and apply very careful and precise the tape. Start opposite of the hole where the valve will go through later, and apply it carefully and cleanly with a lot of pressure to the rim, and avoid air bubbles. I say it again: This is a very important step, so don’t hurry and take your time. If you’ve gone once around and reach the start go another 5 to 10 cm and then cut the tape. Now take the Tubeless Valve from the Tubeless Easy Kit and put it through the rim tape where it belong. Make sure to screw it tightly onto the rim, as the area around the valve can be a point where air easily escapes.

1. Time to take your Tubeless Tire and mount it carefully onto the rim. If you can don’t use the tire lever as it might damage the rim tape - if you had your unfolded tire hang in the sun this should be possible. Make sure that the tire’s beads are on each side of the valve before you head on.

2. Time to inflate! Apply a generous coating of the Easy Fit assembly liquid to both sides of the tire beads, the (clean!) soapy water would work too. For the first inflation a powerful burst of air is needed so take the Tire Booster (or if you have one, the compressor) and attach it to the valve. It makes sense to take the top of the valve off to allow more air through-flow, you get a wee tool for that in the Tubeless Easy Kit. Alrighty, this is the moment of truth: Open the Tire Booster and see how your Tubeless Tire inflates. It should set with several loud BANG! sounds onto the rim, only if you hear that you know everything went as planned. You need to check the line on the tire to control if the complete tire is correctly mounted, if not knead and push the tire to get it into the right position.

This can be a stressful moment if you don’t hear that loud bang which indicates that the tire beads have engaged the rim - I tried for over an hour to get it to set down. The thing is that 29” tires (and Fatbike Tires even more so) take a lot of air to fill and that in my case the Tire Booster didn’t have enough power to engage the complete tire - it didn’t set down on a couple of places which means that the air was escaping and I couldn’t move on. The solution is to empty the whole Tire Booster into the Tire to get the Tire to set down on as many places on the rim as possible, and then switch to the Floor Pump and keep on inflating the tire. This did the trick for me - the tire looked almost like it was going to burst but in the end I heard the several loud bangs which meant the tire was now fully engaged to the rim. Success, at last!

1. Now that the tire sits on the rim you can take the pump/ compressor/ Tire Booster off the valve. This will deflate the tire a wee bit, but that’s not a problem. Remove the valve insert if you haven’t done that already in the previous step and take a bottle of the Doc Blue puncture protection liquid - not it’s time to put it into your Tire and make it Tubeless! You can easily fill the bottle through the valve into the tire - for 29” tires you use the whole 60 ml, smaller tires need less. Once the bottle is empty you put the valve insert back, take the floor pump and inflate the tire again - around 2 bar for these 29” tires is good for starters. Remove the pump, close the valve and now you’ll need to roll and shake the tire for quite a bit - the goal is to distribute the puncture protection liquid everywhere in the tire so that an even cover covers it from the inside. To check the tire once more for leaks you can cover the outside of the tire along the rim with your soapy water - there where there’s bubbles building up you need to move the puncture protection liquid on the inside to cover it better.

If the tire now stays inflated you can attach it back to the bike and get started on the second wheel, after which you should head out for a test ride. All good? Then pack up your bike and head out on a bikepacking Microadventure - Tubeless Edition!

I’m now riding since over a month Tubeless and love it. I can ride my tires with less pressure on the trails which equals better traction, but of course the biggest benefit for me is that I don’t need to worry about punctures and snake bites anymore, as the puncture protection liquid seals those immediately should they happen. It’s just a great feeling to know that you can ride how you want without needing to worry that you might end up with a flat tire! Finally, if you’re a friend of moving pictures then have a look at this video which is by and far the best on how to convert your tires to tubeless tires! More Information on Tubeless you can find on the Schwalbe Tubeless, while the Tubeless FAQ can answer additional questions you might have.

If you enjoyed this & other articles why not support me with a coffee or two? I work Full-Time on Hiking in Finland to bring you inspiring trip reports, in-depth gear reviews and the latest news from the outdoors. You also could subscribe to the rarer-than-ever Newsletter and follow along on Instagram, Twitter and Youtube for more outdoorsy updates!

from Hiking in Finland http://ift.tt/2uBOVIP

Irving Living in New Westminster

Altima Group is in preconstruction with their new 28 unit development comprised of 12 condos and 16 townhouse located in New Westminster. Townhomes will come in a 2 storey configuration, while condos will come in 1, 2 or 3 bedroom options. Each home will have spacious 9′ ceilings, Samsung stainless steel appliances and quartz countertops. Most homes will be overlooking the Fraser River and into Surrey. This development is situated by in a quiet residential neighbourhood, yet conveniently close to all the boutique stores and restaurants along Columbia Street.

 

The post Irving Living in New Westminster appeared first on Vancouver New Condos.

from Buildings – Vancouver New Condos http://ift.tt/2uc3pnc